Infrastructure

Blow room indicates place processing “Air Flow”. The blow room consists of various machinery to conduct the objectives of the blow room. Here the cluster of cotton brought is changed into miniature material. Simply, in the blow room section, the compressed bales are opened, cleaned, and blended/mixed according to a particular length to form a specific size of a lap.

Carding is known as heart of spinning process as it defines the concluded features of yarn. Here the bales processed will open up in single fiber. Apparently, it will make ease to remove the left impurities on the surface of fiber making it straight and separating the short fiber.

Draw frame is a very critical machine in the spinning process. Its influence on quality, especially on evenness is very big. If the Draw frame is not set properly, it will also result in a drop in yarn strength and yarn elongation at break.

To remove the short fibers below a pre-selected length so that the spinner enables to produce a finer or better quality yarn that cannot be possible in carding state.

The yarn produced is processed into a speed frame to attain roving yarn. This is the initial step where twist is inserted for giving hold to the fibers in a spinning mill.

The roving yarn is of little larger diameter as compared to the final yarn. Similarly ring frames are used to produce finished yarns from obtained roving yarns. yarn is resulted having good amount of strength through these ring frames.

Cone winding is just a simple packaging process functioning as a link between last stages of yarn manufacturing and initial stages of fabric manufacturing process. It is important to utilize the winding devices properly to avoid the loss of spinning mills as well as consumers.

Used it for cleaning ring spinning frames, roving frames, winders, twisters.

To wind the twisted strand roving into a bobbin.

We Use Automatic Fire Monitoring System. in accident time automatically starts the water flow System.

High speed spinning machines generate more friction thus giving additional heat to the yarn and as a result of such heat transfer the yarn moisture content is vaporized.

That offers some of the best air engineering units, which are customized to meet the needs of the traditional textile industry. The Total Air Control unit for textiles reliably ensures a uniform, stable temperature in the work zone, and can efficiently control and regulate temperatures

Improving the cleaning efficiency and reducing waste at Blowroom.